Danner 05040 P-4000 Pressurized Filter for 4000-Gallons Ponds Review

Danner 05040 P-4000 Pressurized Filter for 4000-Gallons Ponds

    This fits your .
  • Make sure this fits by entering your model number.
  • Pressurized filter for 4000-gallons ponds
  • Features a unique, manually operated agitator for dislodging over 90 percent of the pond residue that accumulates in the filter chamber
  • This patent pending feature is employed during the backwash and rinse operation
  • For pumps of 1200 to 4000-GPH with 20-feet maximum pumping height
  • 1/2-inch threaded fittings, ball valves for waste line and swivel fitting included

Pressurized filter for 4000-gallons ponds features a unique, manually operated agitator for dislodging over 90 percent of the pond residue that accumulates in the filter chamber. This patent pending feature is employed during the backwash and rinse operation. Available with or without an internally mounted, integrated UV filter light to control green water. Agitator unlocks waste from media saving the amount of water discharged during backwash and rinse cycles. Unique, patent pending 3-way master valve locks into run” “rinse” and “backwash” settings. Clear-vue inspection port to monitor water clarity during backwash/rinse operation. Positive pressure lock ring to ensure a tight water seal. Bio-Matrix media affords maximum surface area for beneficial bacteria growth. Heavy duty poly canister can be buried for hidden installation. Integrated waterproof UV transformer (on units with UV light). 1-1/2in threaded fittings ball valves for waste line and swivel fitting included. For pumps of 1200 to 4000-GPH with 20-feet maximum pumping height.”

Minelab FBS Double-D Coil and Lower Shaft Spare Garden Accessory, 8-Inch Review

Minelab FBS Double-D Coil and Lower Shaft Spare Garden Accessory, 8-Inch

    This fits your .
  • Make sure this fits by entering your model number.
  • Waterproof: Submersible to 1 meter
  • Ideal for wading at the beach, or detecting in streams
  • Compatible with E-TRAC, Safari, Explorer SE Pro

Fits FBS detectors, Safari, E-TRAC, Quattro MP and Explorer series with. This waterproof 8 inch Double-D coil is more sensitive to small targets and more maneuverable than the standard 11 inch coil. It has great target separation in areas littered with junk. Supplied with carbon fiber lower shaft.

AR North America RCAM1G15E-F8 1500 PSI/1.0 GPM Misting Annovi Reverberi Direct Drive Pump Review

AR North America RCAM1G15E-F8 1500 PSI/1.0 GPM Misting Annovi Reverberi Direct Drive Pump

    This fits your .
  • Make sure this fits by entering your model number.
  • New ceramic plungers, thicker wall to help prevent thermal shock
  • Designed for heavy duty misting applications
  • Stainless steel valves
  • High strength forged brass manifold for long term use
  • New connecting rod with 12% more load surface

Annovi Reverberi / AR north America RCAM e version with f8 flange series misting pumps are designed to direct drive on electric NEMA 56 c motors ranging from 0.5 – 2.0 Hp. This triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCAM is a result of our combined 60 years of pumps building experience and expertise.

Briggs & Stratton Horizontal Intek I/C 9.0 TP 1 x 2-7/8 #122012-0560 (12S402-0060) Review

Briggs & Stratton Horizontal Intek I/C 9.0 TP 1 x 2-7/8 #122012-0560 (12S402-0060)

    This fits your .
  • Make sure this fits by entering your model number.
  • 1″ x 2-7/8″ shaft, tapped 3/8-24″ with 1/4″ keyway

9.0 Torque Power Briggs Intek I/C OHV 1″ x 2-7/8″ shaft, tapped 3/8-24″ with 1/4″ keyway. Cast iron sleeve. Universal replacement engine for blowers, etc. 2 year consumer/ 1 year commercial warranty. Model 12S402-0060

Xtreme Outdoor Power Equipment Bundle – 2 Items: PTO Electric Blade Clutch, Wire Harness Repair Kit. Replaces Exmark PTO Blade Clutch 109-7666 OEM Upgrade w/Wire Harness Repair Kit Review

Xtreme Outdoor Power Equipment Bundle - 2 Items: PTO Electric Blade Clutch, Wire Harness Repair Kit. Replaces Exmark PTO Blade Clutch 109-7666 OEM Upgrade w/Wire Harness Repair Kit

    This fits your .
  • Make sure this fits by entering your model number.
  • Bundle of 1 Electric PTO Blade Clutch, 1 Wire Harness Repair Kit
  • FREE Upgraded – High Temperature Bearings
  • TOUGH Machined Billet Pulley with Replaceable Bearing
  • OEM UPGRADE

Bundle of 1 Electric PTO Blade Clutch, 1 Wire Harness Repair Kit

This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !

Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.

Marathon 15×6.50-6″ Flat Free Tire on Wheel, 3″ Hub, 3/4″ Bushings (Pack of 3) Review

Marathon 15x6.50-6

    This fits your .
  • Make sure this fits by entering your model number.
  • 13.9″ tire diameter. 500 lb load capacity.
  • Common as the front tire of a riding lawnmower.
  • Flat free tire made of lightweight, durable solid polyurethane.
  • 3″ centered hub with 3/4″ commercial grade oil infused bushings

Size:Pack of 3

Turf tread tire on a 3″-Inch centered rim with Precision 3/4″-Inch commercial grade oil infused bushings. The perfect tire for your riding lawnmower.

Hilti SFB 150 Battery (2.0 NICD) Item No.: 00340890 Review

Hilti SFB 150 Battery (2.0 NICD) Item No.: 00340890

    This fits your .
  • Make sure this fits by entering your model number.
  • Battery Capacity – 31.2 Wh
  • Voltage – 15.6 V
  • Battery Capacity – 2.0 Ah
  • Battery Type – NiCd 2.0 Ah
  • Approvals – CE, UL

See more product details

NiCd 2.0 Ah battery for SFH 151-A, SF 150-A and SFL 12/15 flashlight.