get the best experience
TWO New 26X12.00-12 26×12-12 Industrial/ Utility R-1 Lug Tires 10 ply Rated Heavy Duty
Milwaukee 48-59-1807 M18 & M12 Rapid Charge Station
The 18V X2 LXT Lithium-Ion (36V) Cordless Blower (model XBU01PT) is powered by two 18V LXT batteries, so users get 36V power and run time for corded and gas-powered demands, without leaving the 18V LXT platform. Model XBU01PT is a kit and includes two fast-charging 18V LXT 5.0Ah batteries and an 18V Dual Port Charger that will charge two batteries simultaneously for increased productivity and less downtime.
This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !
Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.
The ACE 400 includes a higher, 10 kHz frequency to provide better sensitivity to low and medium conductivity targets, such as gold and lead.
The detector’s Frequency Adjust feature allows users to easily toggle between slight frequency shifts to help eliminate interference from other detectors or power sources.
The ACE 400 ships with an 8.5×11 DD-configuration PROformance searchcoil that has proven to be very popular with the company’s previous ACE™ 350 and EuroACE™ detectors.
The ACE 400 includes five discrimination modes, electronic pinpointing, sensitivity adjustment, and High-Resolution Iron Discrimination.
The ACE 400 will ship with three FREE accessories to complement the new release: an 8.5”x11” DD searchcoil cover; volume-control ClearSound Easy Stow headphones; and a new ACE Environmental Cover-up to protect the control box from rain, dust, and mud.
Makro RC40 15.5″ x 13″ Search Coil. This coil provides maximum coverage and will detect both individual targets and larger items like treasure caches at great depth. This Double D search coil is for use with the Makro Racer and Racer 2 metal detector. This Search Head measures 15.5”x13” (40 cm x 33.5cm) in diameter and is the largest search coil made for the Racer detector. This coil provides maximum coverage and will detect both individual targets and larger items like treasure caches at great depth. This is the largest optional search coil for the Racer metal detector by Makro. This coil provides excellent, ground coverage and depth. With four optional Makro Racer search coils to choose from, you can always select the best search coil for your environment. Achieve the best performance in a variety of areas. (Ships with coil hardware.)
This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !
Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.
This Eaglewash I smooth blue 25′ hose is manufactured for pressure washer equipment with working pressures up to 4,000 psi. Its modified nitrile synthetic rubber tube offers maximum resistance to both petroleum-based oils and animal fats, while its modified neoprene cover is highly resistant to both abrasion and oil. Its braided wire reinforcement provides the strength necessary to reach and maintain its maximum pressure rating, and it is capable of functioning effectively at temperatures up to 300 degrees F (149 degrees C) and has a minimum burst pressure of 12,000 psi and a maximum working pressure of 4,000 psi. It comes fitted with a 3/8″ male National Pipe Thread (NPT) coupling and a 3/8″ male NPT swivel coupling with guards. This pressure washer hose is suitable for applications using normal cleaning chemicals used in the wash industry.
This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !
Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.
Exmark 103-0690 Electric Clutch. Also replaces Exmark part number 1-653048, 1-653292 Warner 5218-80. Fits Lazer Z HP Serial no. 260,000 and higher. 1″ ID 7-3/8″ Pulley For 5/8″ Belt Replaces: EXMARK 1-653048 EXMARK 1-653292 EXMARK 103-0690 EXMARK 109-2915 EXMARK 109-2916 EXMARK 109-9276