Makita BL1850B2DC2X 18V LXT Lithium-Ion Battery & Dual Port Charger Starter Pack (5.0Ah) Review

CountrySpecter Power Tool Parts and Accessories No Comments

Makita BL1850B2DC2X 18V LXT Lithium-Ion Battery & Dual Port Charger Starter Pack (5.0Ah)

    This fits your .
  • Make sure this fits by entering your model number.

  • 18V LXT Lithium-Ion 5.0Ah battery reaches a full charge in 45 minutes or less
  • Provides up to 65% more run time per charge compared to BL1830
  • Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-4°f/-20°c)
  • Equipped with Star protection computer Controls to protect against overloading, over-discharging and over-heating

› See more product details

Makita BL1850B2DC2X 18V LXT Lithium-Ion Battery & Dual Port Charger Starter Pack (5.0Ah)

Zodiac R0474100 120-Volt Printed Circuit Board with Light Shaping Diverger Replacement for Select Zodiac Jandy WaterColors LED Large Light Engine Review

CountrySpecter Replacement Parts and Accessories No Comments

Zodiac R0474100 120-Volt Printed Circuit Board with Light Shaping Diverger Replacement for Select Zodiac Jandy WaterColors LED Large Light Engine

    This fits your .
  • Make sure this fits by entering your model number.

  • Printed circuit board with light shaping diverger replacement
  • Fits Zodiac Jandy WaterColors LED large light engine models CPHVLED, CPLVLED

This 120 volt printed circuit board with light shaping diverger is designed to use with Zodiac Jandy WaterColors LED large light engine models CPHVLED, CPLVLED.

Set Of 3 Spindle Assembly Replaces Toro 116-5712 109-8744 Review

CountrySpecter Replacement Parts and Accessories No Comments

Set Of 3 Spindle Assembly Replaces Toro 116-5712 109-8744

    This fits your .
  • Make sure this fits by entering your model number.

  • Sold on Amazon

Set Of 3 Spindle Assembly

Replaces OEM

Toro 116-5712

Toro 109-8744

COMPLETE CUTTER HOUSING.

Fits Toro Consumer 74815, Titan Z5200.

Also fits Exmark Quest 48″ & 52″ decks.

Stens 255-539 Electric PTO Clutch Review

CountrySpecter Replacement Parts and Accessories No Comments

Stens 255-539 Electric PTO Clutch

    This fits your .
  • Make sure this fits by entering your model number.

  • Replaces: Warner 5215-129
  • For proper ordering, reference Warner or Ogura part number stamped on clutch
  • Installation: to prevent premature clutch failure, Follow the instruction sheet included with the clutch

Stens 255-539 Electric PTO Clutch for Warner 5215-129 ID: 1″ Height: 3 1/2″ Diameter Pulley: 5 3/8″ Direction: Counter clockwise Uses belt width: 1/2″ Installation: To prevent premature clutch failure, follow the instruction sheet included with the clutch Designed For: Rugged use For Proper Ordering: Reference Warner or Ogura part numbers stamped on clutch Made By: An OEM supplier

DEWALT DW0246 24-Volt 1 Hour Slide Style Charger for DW0242 Battery Only Review

CountrySpecter Power Tool Parts and Accessories No Comments

DEWALT DW0246 24-Volt 1 Hour Slide Style Charger for DW0242 Battery Only

    This fits your .
  • Make sure this fits by entering your model number.

  • Fan-cooled battery and charger technology increases run-time and number of recharges
  • Charges all DEWALT 24-volt batteries so 24-volt users need only one charger
  • Charges all 24-Volt batteries in 1 hour or less thus minimizing down time
  • 3-Stage charging system provides maximum run-time and extends overall life of the battery
  • Battery thermal protection system, Diagnostics with LED indicator are 5 indicators to communicate battery charge status

› See more product details

Amazon.com

Designed to increase run-time up to 40 percent, the DW0246 charges all DEWALT 24-volt batteries in about an hour. The on-board fan prevents over-heating, so you can perform up to three times more charges. It’s also compact and portable, so you can store it easily in a tool box, or simply carry it in your belt or pouch when you’re on the job.

From the Manufacturer

The DEWALT DW0246 24-volt battery charger does much more than simply recharge batteries. This state-of-the-art electronic device is a sophisticated diagnostics tool that ensures you get absolute peak performance, ultimate power output and the longest possible life from your DEWALT 24-volt batteries. The fast one-hour charger features: a fan-cooled technology that increases the run-time and number of recharges; thermal protection to prevent charging batteries that are too cold or too hot, which could damage the batteries; and three-stage charging system to provide maximum run-time. There’s also a five-LED indicator, which communicates the charge status: fully charged, charging, power line problems, replace pack, and battery too hot or too cold. The DW0246 is compatible with all DEWALT 24-volt batteries. And it’s backed by DEWALT’s three-year limited warranty, 90-day money-back guarantee, and one-year free service contract.

Xtreme Outdoor Power Equipment Bundle – 2 Items: PTO Electric Blade Clutch, Wire Harness Repair Kit. Replaces Hustler 787366K Fatboy PTO Clutch – w/Harness Repair Kit – OEM Upgrade Review

CountrySpecter Replacement Parts and Accessories No Comments

Xtreme Outdoor Power Equipment Bundle - 2 Items: PTO Electric Blade Clutch, Wire Harness Repair Kit. Replaces Hustler 787366K Fatboy PTO Clutch - w/Harness Repair Kit - OEM Upgrade

    This fits your .
  • Make sure this fits by entering your model number.

  • Bundle of 1 Electric PTO Blade Clutch, 1 Wire Harness Repair Kit
  • FREE Upgraded – High Temperature Bearings
  • TOUGH Machined Billet Pulley with Replaceable Bearing
  • OEM UPGRADE

Bundle of 1 Electric PTO Blade Clutch, 1 Wire Harness Repair Kit

This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !

Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.

(2) Gravely Flat Free Wheel Assemblies 13×6.50-6 Dk Grey Repl 07101110 PT 100 Review

CountrySpecter Replacement Parts and Accessories No Comments

(2) Gravely Flat Free Wheel Assemblies 13x6.50-6 Dk Grey Repl 07101110 PT 100

    This fits your .
  • Make sure this fits by entering your model number.

  • Semi-Pneumatic Flat Free Tires
  • Replaces Gravely Ariens 07101110
  • Powder Coated Dark Gray
  • Fits Pro Turn 148, 152, and 160
  • High-Speed Tapered Roller Bearings with Grease Zerk

You are purchasing a pair of new Gravely Flat Free wheel and tire assemblies

—Product Features—
Heavy Duty Wheels
Powder Coated Dark Gray
Semi-Pneumatic Tires
Tapered Roller Bearings
Bearing Races
Grease Seals – Spacers
Spanner Bushings
and
Grease Zerks

—Specifications—
Color: Dark Gray Rim
Tire Type: Semi-Pneumatic
Tread: Smooth
Tire Size: 13×6.50-6

—Fits Models—
PT 148
PT 152
PT 160

—Replaces—
07101110

Xtreme Outdoor Power Equipment Replaces Ferris 5023233 PTO Clutch with High Torque & Replaceable Wire Harness Review

CountrySpecter Replacement Parts and Accessories No Comments

Xtreme Outdoor Power Equipment Replaces Ferris 5023233 PTO Clutch with High Torque & Replaceable Wire Harness

    This fits your .
  • Make sure this fits by entering your model number.

  • FREE Upgraded – High Temperature Bearings
  • TOUGH Machined Billet Pulley with Replaceable Bearing
  • OEM UPGRADE

This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !

Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.