DeWalt DW9057 7.2V NiCd 1.25 Amp/Hr Battery 5 Pack Review

CountrySpecter Power Tool Parts and Accessories No Comments

DeWalt DW9057 7.2V NiCd 1.25 Amp/Hr Battery 5 Pack

    This fits your .
  • Make sure this fits by entering your model number.

  • Battery Pack, 7.2V, NiCd, 1.2A/hr.
  • Features: 10% Lighter Than Standard Batteries, 15% Smaller Than Standard Batteries
  • Voltage: 7.2
  • Item: Battery Pack
  • Battery Capacity: 1.2Ah

› See more product details

DW9057 15-Percent smaller and 10-percent lighter than standard batteries, the DeWalt DW9057 Compact 7.2-volt 1.7 amp-hour Ni-Cad pod style battery is compatible with all DeWalt 7.2-volt tools (except Univolt tools), a feature that allows you to run multiple tools off of the same battery pack. The DeWalt DW9057 7.2-volt compact battery pack is small in size, but big on performance. In fact, it’s 15% smaller and 10% lighter than standard batteries of the same voltage, yet it pumps out 1.7-amp-hours of reliable, long-lasting power. This pod-style NiCad battery will power the entire line of DeWalt 7.2-volt tools (except Univolt tools), allowing you to run multiple tools off the same pack. It’s backed by DeWalt’s 90-day money-back guarantee, one-year free service contract, and three-year limited warranty. Features: -1.7 Amp hour NiCd pod style battery. -10% Lighter than stnadard batteries. -15% Smaller than standard batteries. -Powers the DeWalt line of 7.2-volt tools allowing users to run multiple tools off of the same battery pack. -Voltage: 7.2 volts. -Dimensions: 3.25″ H x 5.75″ W x 7.25″ D.

Xtreme Outdoor Power Equipment Replaces Grasshopper Models: 218 220 223 – PTO Clutch – New Heavy Duty Fatboy!!! Review

CountrySpecter Replacement Parts and Accessories No Comments

Xtreme Outdoor Power Equipment Replaces Grasshopper Models: 218 220 223 - PTO Clutch - New Heavy Duty Fatboy!!!

    This fits your .
  • Make sure this fits by entering your model number.

  • FREE Upgraded – High Temperature Bearings
  • TOUGH Machined Billet Pulley with Replaceable Bearing
  • OEM UPGRADE

This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !

Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.

Xtreme Outdoor Power Equipment Replaces Troy Bilt PTO Clutch 1772076, GW1772076 – w/High Torque Upgrade ! Review

CountrySpecter Replacement Parts and Accessories No Comments

Xtreme Outdoor Power Equipment Replaces Troy Bilt PTO Clutch 1772076, GW1772076 - w/High Torque Upgrade !

    This fits your .
  • Make sure this fits by entering your model number.

  • FREE Upgraded – High Temperature Bearings
  • TOUGH Machined Billet Pulley with Replaceable Bearing
  • OEM UPGRADE

This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !

Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.

Alaskan Saw Mills (For 36″ Chainsaws) Review

CountrySpecter Replacement Parts and Accessories No Comments

Alaskan Saw Mills (For 36

    This fits your .
  • Make sure this fits by entering your model number.

  • Transform your chainsaw into a portable saw mill!
  • These saw mill attachments mount easily to your chainsaw bar for fast, easy lumber production
  • Chain: 0.05 gauge
  • Requires 3/8 Pitch Ripping Chain (sold separately)

Size:For 36″ Chainsaws

These saw mill attachments mount easily to your chainsaw bar for fast, easy lumber production. Use the compact, lightweight Alaskan Small Log Mill with chainsaws 20” or smaller. Three sizes of the Alaskan Mark III Saw Mills are available for 24”, 30”, and 36” chainsaws. Requires 3/8 Pitch Ripping Chain (sold separately).

Teknetics Omega 8500 Metal Detector Review

CountrySpecter Metal Detectors No Comments

Teknetics Omega 8500 Metal Detector

    This fits your .
  • Make sure this fits by entering your model number.

  • User-friendly metal detector ideal for coin shooting, relic hunting, and gold prospecting
  • Large, easy-to-read LCD display with 2-digit numerical target ID system
  • Running depth indicator identifies target depths from 0 to 8 inches
  • Discrimination, All Metals Autotone, and Static Pinpoint modes; 4-tone audio discrimination
  • Runs for up to 25 hours on single 9-volt battery; 7.8 kHz operating frequency

Proud descendent of the Teknetics T2 Tradition

Xtreme Outdoor Power Equipment Replaces John Deere Upgrade PTO Clutch TCA15800 ZTrak 737, 757, 777, 797 Review

CountrySpecter Replacement Parts and Accessories No Comments

Xtreme Outdoor Power Equipment Replaces John Deere Upgrade PTO Clutch TCA15800 ZTrak 737, 757, 777, 797

    This fits your .
  • Make sure this fits by entering your model number.

  • FREE Upgraded – High Temperature Bearings
  • TOUGH Machined Billet Pulley with Replaceable Bearing
  • OEM UPGRADE

This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !

Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.

Stens 265-137 Belt Replaces Exmark 1-633173 111-1/4-Inch by-5/8-inch (Pack of 3) Review

CountrySpecter Replacement Parts and Accessories No Comments

Stens 265-137 Belt Replaces Exmark 1-633173 111-1/4-Inch by-5/8-inch (Pack of 3)

    This fits your .
  • Make sure this fits by entering your model number.

  • Length 111-1/4-inch
  • Width-5/8-inch
  • Made to OEM specs

Size:Pack of 3

Stens carries a wide variety of OEM / aftermarket replacement parts for small engine outdoor power equipment. Fits EXMARK Lazer Z, 52-inch, 60-inch and 72-inch decks (serial number 369,999 and lower)

Powerworks 60V Brushless Tiller, Battery Not Included TL60L00PW Review

CountrySpecter Tillers No Comments

Powerworks 60V Brushless Tiller, Battery Not Included TL60L00PW

    This fits your .
  • Make sure this fits by entering your model number.

  • High-efficiency 60V brushless motor with electric start provides more power, torque, and longer life without the hassle of gas
  • 4″ hardened steel tines offer an 8″ tilling width and 5″ tilling depth
  • 3 position height adjustment for various tilling depths
  • Foldable handles for compact storage
  • Battery and Charger Not Included

Style:Battery Not Included

60V 8” Brushless Tiller POWERWORKS – Performance through Power – POWERWORKS 60 Volt tools are designed to get the job done! Our 60V Tiller is the most revolutionary battery-operated system delivering powerful performance and durability. 60 Volts gives you the power you need and the 2.5 Ah battery provides ample run-time. Easily power through your yard work. (Battery Not Included) Our 60V POWERWORKS Battery is compatible with all our POWERWORKS 60V tools, simply take the battery out of one tool, place it in another, push the start button, and you’re ready for your next job. Use one battery, charge one battery and you will have all the continual run-time you need. No gas and no maintenance required. POWERWORKS 60V 8” Brushless Tiller features include: 8” tilling path, 5” tilling depth, 3 position height adjustment and a tine speed up to 1700 strikes per minute. Our POWERWORKS brushless motor provides your POWERWORKS tool with longer run-time, more torque and more power. This leads to less wear and tear, extending the life-time of the tool. POWERWORKS tools come with a 4-year warranty on the tool.

OdorStop Axial Blower (OS2700) Review

CountrySpecter Replacement Parts and Accessories No Comments

OdorStop Axial Blower (OS2700)

    This fits your .
  • Make sure this fits by entering your model number.

  • 1 hp, 3,450 rpm thermally protected motor/powerful 2200 cfm/39
  • Extra long 30 foot safety yellow power cord/tough roto-molded poly housing/capable of connecting up to 125’ of duct
  • Can connect to any flexible 12” duct/positive or negative air flow
  • High 260 static pressure/115 volt, 9 amps/built-in cord wrap
  • Stackable up to 3 high for easy storage/excellent for confined spaces/etl/ce/saa certified

Size:OS2700

The odorstop OS2700 is designed for drying of wet conditions and materials, odor removal, air ventilation, extraction, and circulation. With a powerful 1hp thermally protected motor, the OS2700 can push air through 150” of ducting or acrOSs open areas. An extra long 30 foot safety yellow power cord and a 2 speed waterproof switch make this the perfect choice for all air moving needs.

48″ Pallet Fork Blades 4,000 LB capacity attachment Review

CountrySpecter Replacement Parts and Accessories No Comments

48

    This fits your .
  • Make sure this fits by entering your model number.

  • – Clips to lock forks in place
  • – 4,000 pound capacity per pair
  • – Weight: 98 lbs each
  • – Size: 48″ x 4″ x 1.25″ thick
  • – 16″ from the upper rail to the lower rail

These Titan pallet fork blades are ideal for picking up pallets and moving heavy objects around your warehouse, farm or job site. The blades are fully forged and have a thick patented heel guard and will last years longer than standard forks.

Features: 
– Clips to lock forks in place 
– 4,000 pound capacity per pair 
Specifications: 
– Weight: 98 lbs each 
– Size: 48″ x 4″ x 1.25″ thick  
– 16″ from the upper rail to the lower rail