get the best experience
This is one of the BEST replacement pumps for your worn out pump. This unit is designed for daily use and it is perfect for contractors. It will fit most HORIZONTAL shaft engines with a 1″ diameter shaft. The pump bolts to the motor with a 4 bolt pattern and bolts up on 8 to 13 horsepower Honda Motors. This pump is capable of producing up to 4000PSI at 4.0 GPM but it will wor great on any smaller washers with a 1″ shaft. The pump includes an external bypass unloader, a thermal relief valve, and male quick connect. This pump is completly rebuildable from the valves to the packings and unloader.
For use with the PRO Impact Implements 1 Point Lift System ONLY
Impact Implements Pro Disc Plow / Harrow is a must have multi-functional accessory. A versatile tool for food plot preparation, gardening or just cutting up clumps of soil, it is also used to chop up unwanted weeds or crop remainders. Offset discs repeatedly slice the ground, loosening soil as they cut. The integrated weight tray adds up to 80lbs of downward force. Attaches to the Impact Implements Pro 1-Point Lift System, CAT-0 3-Point Hitch or Sleeve Hitch with a single pin.
Uses:
– ATV
– UTV
– SxS
– Garden Tractor
– Lawn Tractor
Specs:
– Dimensions: 55″ (L) x 15″ (H) x 54″ (W)
– Weight tray: 17″ (W) x 17″ (L) x 1 3/8″ (D)
– Weight: 120 lbs
– Number of discs: 8
Features:
– Eight (8), 12″ notched, hardened steel, cutter disc blades
– Two (2), sets of four discs provide 54″ of cutting width
– Features a stable axle with two (2) heavy duty roller bearings per axle
– 15″ blade angle of attack
– Integrated weight tray adds downward pressure and increases soil penetration
– 1 Year Warranty
– Easy one (1) pin mounting with the included pin
– Requires a 2″ hitch receiver (not included) installed on ATV/UTV/SxS
– For use with Impact Implements Pro 1-Point Lift System, CAT-0 3-Point Hitch and Sleeve Hitch (sold separately)
– NOT for use with Impact Implementss Standard 1 Point Lift System Available Impact Implements Pro
Accessories:
– 1-Point Lift System (with or without hydraulic lift)
– Landscape Rake with Tipper Latch
– 3-Position Blade with Box Ends
– Cultivator
– Cultipacker
– Aerator
– Middle Buster
– Off-Road Trailer
Stens carries a wide variety of OEM / aftermarket replacement parts for small engine outdoor power equipment. Fits Cub Cadet LGT1050 2012-2014, LGT1054 2012-2014, LGTX1050 2012-2014, LGTX1054 2012-2014, LTX1042 2009-2011, LTX1042KH 2013, LTX1042KW 2012, LTX1045 2009-2013, LTX1046 2009-2011, LTX1046KW 2011-2012, LTX1046M 2011-2014, LTX1050KH 2009, LTX1050KH 2011-2013, LTX1050KW 2011-2012, SLTX1050 2009-2011, SLTX1054 2009-2011 and SLTX1054VT.
Briggs & Stratton’s history covers over 100 years of taking care of the customer with innovative and practical power products. Look around your neighborhood and you will see a Briggs & Stratton powered product in more garages and tool sheds than any other power equipment manufacturer.
Designed for reliability against back feeding to the utility lines during an outage, the Briggs & Stratton 50 Amp automatic transfer switch features 12 pre-selected breakers and is able to supply power to all circuits of your home or small business while automatically managing critical loads. Custom made exclusively for Briggs & Stratton Power Products standby generator systems, the switch reduces the overall energy cost by giving you the power you need exactly when you need it. The switch is adequate for either indoor or outdoor installation for added versatility.
This is an upgraded version of the OEM Clutch. Xtreme Mower Clutches, uses machined billet pulleys, upgraded bearings with high temperature grease, and a triple protected wire harnesses. The proprietary Xtreme Cool Coil technology reduces temperature to extend clutch life, and has a replaceable pulley bearing. Every Xtreme Clutch comes with a watertight integrated wire harness – PLUG and PLAY !
Xtreme Mower Clutches is a registered trademark of Extreme Mower Clutches Inc. (XMCI) of Boca Raton Florida. XMCI does not imply any association or affiliation with any OEM Manufacture including Warner Electric, Ogura Industrial Corp., John Deere, Exmark/Toro, Hustler, Husqvarna, Cub Cadet, or any of its associates or affiliates, trademarks or copyrights. XMCI also states “OEM Upgrade” or “Warner Upgrade” only refers to the billet pulley, the use of stainless steel braking rivets, replaceable pulley bearing, Xtreme wire protection system, and Cool coil technology, most of which are unique to the Xtreme Mower Clutch product line.
Ford Input Shaft C5NN7015T 2000, 3000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 3400, 3500 Ford 2000, 3000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 3400, 3500 Ford/New Holland 4 Speed 9-Inch Length, For Step Up Step Down Transmissions
John Deere Original Equipment Hood #AM132688
Stens 255-543 Electric PTO Clutch for Warner 5215-130 ID: 1″ Height: 4″ Diameter Pulley: 5 3/8″ Direction: Counter clockwise Uses belt width: 1/2″ Installation: To prevent premature clutch failure, follow the instruction sheet included with the clutch Designed For: Rugged use For Proper Ordering: Reference Warner or Ogura part numbers stamped on clutch Made By: An OEM supplier
G’BOX ASY, DECK DRIVE